Oiling your patio: What matters now after the gardening season
The gardening season is over, the furniture has been put away, and the wooden patio has had a summer of sun, rain and many feet. Now is the right time to decide how to protect your decking boards over the winter and start the new year with a well-maintained patio. A key role is played by patio oil: Which oil is right for your wood, is it worth oiling the patio in autumn, or is spring the better time, and how much oil do you actually need?
In this guide we answer exactly these questions. The complete checklist for the cold season, including leaves, cleaning, the subframe and snow, can be found in our post Making your patio winter-ready. Here it is all about oil: the right type, the right time and the right amount.
Quick decision guide
- Choose the oil according to the type of wood: Gunreben patio oils are color-matched to specific woods, such as Bangkirai/Cumaru/Garapa, Ipe/Teak, thermally modified ash or larch/Douglas fir/oak. For a colorless finish, there is the Colorless Patio Oil.
- In autumn, only oil when the weather is suitable: The wood must be clean and dry, and the oil needs dry, frost-free days to soak in and dry. If that is no longer the case, only clean now and oil in spring.
- Do not oil in winter: In wet, dewy and frosty conditions, oil does not soak in well. Use the winter to plan the wood type, area and amount of oil for spring.
- Roughly calculate the quantity: According to the product specifications, you need approx. 50 ml per m² per coat. A 2.5-liter container is therefore sufficient for about 50 m² per coat, and less for grooved decking boards.
- Do not forget the end grain: Protect exposed end grain with end-grain wax, which can also be applied in the cooler season when the weather is dry.
Suitable products from Gunreben:
Patio Oil Bangkirai/Cumaru/Garapa – pigmented oil for tropical hardwoods such as Garapa, Cumaru and Bangkirai.
Patio Oil Thermally Modified Ash – matched to thermally modified ash and other dark outdoor woods.
Patio Oil Larch/Douglas Fir/Oak – color tone for native and European patio woods.
G² Patio Wood Cleaner – for basic cleaning before oiling.
Why a wooden patio is oiled
Wood changes outdoors: UV radiation breaks down the pigments on the surface, rain washes them out, and over time almost every wooden patio develops a silver-grey patina. This is not damage, but a matter of appearance. Anyone who wants to preserve the warm color tone of their decking boards should regularly refresh it with a pigmented patio oil.
According to the product description, Gunreben patio oils penetrate the wood and do not form a closed film on the surface. The pigmented varieties support protection against UV-induced color changes and refresh the color effect of the surface. The colorless oil protects treated surfaces from moisture, UV exposure and weather influences without changing the color tone. Because the oil does not form a layer that later peels off, it can simply be reapplied at the next maintenance without sanding beforehand.
Anyone who likes the grey patina can also do without oiling. However, regular cleaning, good ventilation and protected end grain remain important in any case.
Which patio oil for which wood?
The most important rule: The oil should match the type of wood. Pigmented oils are matched to the color tone of certain woods. A shade that is too light or too dark can change the appearance of the patio. This overview helps with the selection:
| Patio wood type | Suitable patio oil | Decking boards at Gunreben |
|---|---|---|
| Garapa, Cumaru, Bangkirai | Patio Oil Bangkirai/Cumaru/Garapa | Garapa patio decking boards, Cumarú Prime 21 × 90 mm, Bangkirai Prime grooved |
| Ipe (Ipê), Teak | Patio Oil Ipe/Teak | Ipê Prime smooth 21 × 145 mm |
| Thermally modified ash and other dark outdoor woods | Patio Oil Thermally Modified Ash | Thermo Ash Prime smooth 21 × 130 mm |
| Larch, Douglas fir, Oak | Patio Oil Larch/Douglas Fir/Oak | Douglas fir patio decking boards, Larch Canadian smooth, Oak Standard grooved |
| Any wood type, if the color tone is to remain unchanged | Colorless Patio Oil | also suitable for garden furniture, playground equipment and wooden facades |
Oiling thermally modified ash: Which oil?
Thermally modified ash has a dark, even color tone due to the heat treatment. The Patio Oil Thermally Modified Ash is matched exactly to this tone and, according to the product description, does not form a film. According to the manufacturer, it reduces cracking and reduces the swelling of the wood. Untreated, even thermally modified ash turns grey over time. Anyone who wants to preserve the brown tone should therefore not delay the care for too long.
Cumaru and Garapa: Which oil?
The Patio Oil Bangkirai/Cumaru/Garapa is designed for Cumaru, Garapa and Bangkirai. The pigmented formulation refreshes the color effect of these hardwoods. Which woods differ in hardness, color and maintenance requirements, you can read in the Comparison of hardwood patio decking boards.
When to oil? Patio care throughout the year
The right time is determined above all by the weather. Oil needs dry wood and several dry days so that it can soak in and dry. This is what a sensible annual cycle looks like:
- October to early November: Clean, check end grain, inspect the surface. Only oil if the wood has dried out and several dry, mild days without night frost follow.
- Winter (December to February): Do not oil. Gently remove leaves and snow and do not leave plant pots in the same place for weeks. The quiet time is suitable for noting down the wood type and area and ordering the right oil for spring.
- Spring (usually April/May): The best time for the main care. As soon as the wood has dried out after winter and the weather has stabilized, it is thoroughly cleaned and then oiled.
- Summer: Refresh heavily used areas if necessary, but not in the blazing midday sun. Tips for hot days can be found in the post Caring for your patio in hot weather.
Is it worth oiling the patio in autumn?
That depends on the condition of the boards and the weather. A simple test: Drip some water on the board. If it beads off, the surface is still well cared for. Then a cleaning in autumn is sufficient, and the next oil care follows in spring. If the water soaks in immediately and darkens the wood unevenly, the surface is washed out. If another dry, mild phase is still ahead, a follow-up treatment before winter can be useful.
But do not oil in autumn just in case. After a wet cleaning, the wood needs time to dry. Morning dew, fog and cold nights significantly prolong the drying, and oil that does not dry properly can leave sticky spots. The processing instructions on the container are decisive. In doubt, spring is the safer time.
New patio laid in autumn: What to do with the first treatment?
If your patio was only laid in recent weeks, the question of the first treatment arises. If the weather is still suitable for a clean, dry oiling, you can carry out the first treatment now. If it is too wet or too cold for that, at least protect all end grain and cut surfaces with end-grain wax and catch up with the first treatment in spring. Slight discolorations over the winter can be refreshed before oiling with the patio wood cleaner.
Especially with freshly laid woods such as Garapa, Larch or thermally modified wood, wood components can be washed out in the first few weeks. This is known with these woods and can discolor light surfaces. Plan the drainage so that rainwater does not run off over plaster or light tiles.
And the WPC patio?
WPC and BPC boards are not oiled. There are separate products for them: the G² WPC & BPC Cleaner for basic cleaning and the G² WPC & BPC Surface Protection, a colorless impregnation. According to the application instructions, the surface must be clean, dry and frost-free for this, and it is processed at over 8 °C. This becomes difficult in late autumn, so the same applies here: clean now, protect in spring. You can find all products under WPC care products.
Which patio oil is right for which project?
- Garapa patio in the garden: Patio Oil Bangkirai/Cumaru/Garapa, plus end-grain wax for the cut edges. Background on the wood selection: Ipé or Garapa?
- Roof patio made of thermally modified ash: Patio Oil Thermally Modified Ash. On sunny roof surfaces, it is worth checking the condition particularly early in spring.
- Douglas fir or larch patio: Patio Oil Larch/Douglas Fir/Oak. More about the differences of the woods: Douglas fir or hardwood?
- Wooden garden furniture, playground equipment or cladding: Clear Decking Oil, if you want to preserve the existing colour.
- Greyed decking that needs its colour restored: first clean thoroughly with the decking cleaner, then apply the pigmented oil suitable for the type of wood in spring.
Conclusion: Plan now, oil in spring
At the end of the gardening season, the following applies to wooden decking: clean it, protect the end grain and only oil it again in really dry, mild weather. In most cases, spring is the better time for major maintenance. You can use the winter to choose the right oil for your type of wood and calculate the required quantity: approx. 50 ml per m² per coat.
Choose your oil from the Wood Decking Care category and order the cleaner and end-grain wax at the same time. This way, you'll be well prepared for the next season. You can find additional care products under Cleaning & Care, and anyone planning a deck in the new year will find the range under Wood Decking.
Larger areas or maintenance for multiple properties? Garden and landscape contractors, property management companies and other businesses can submit their request via our commercial contact form or by email at info@gunreben.de. Private customers can contact us via the contact page.
FAQ on Oiling Decking
Answers to frequently asked questions about timing, oil and quantity.
Only if the surface is washed out and several more dry, mild days without overnight frost follow. The wood must be clean and dry. If water still beads on the boards, cleaning in autumn is sufficient, and it can be oiled in spring.
This depends on the type of wood, sun exposure, usage and the desired appearance. A good guide is the water test: if water soaks in immediately and leaves dark patches on the wood, it is time for maintenance. Many decks are maintained once a year in spring.
For thermally modified ash, Gunreben offers Thermally Modified Ash Decking Oil. It is designed for the dark colour of thermally modified ash and, according to the product description, is non-film forming.
For Cumaru, Garapa and Bangkirai, the Bangkirai/Cumaru/Garapa Decking Oil is designed. The pigmented formula is tailored to the colour of these hardwoods and refreshes the appearance of the surface.
According to the product specifications, approx. 50 ml per m² per coat. One litre covers approx. 20 m², and a 2.5-litre container covers approx. 50 m² per coat. For grooved boards and very dry wood, the consumption may be higher.
