Cart
0
Now available at Gunreben.de in the usual top quality:
Oak Lamparkett
Lamparkett is a solid, thin oak parquet that is particularly suitable for renovations where a genuine wood floor with a low installation height is required. At 10 mm thick, the floor structure remains slim without sacrificing the quality of a single-layer solid parquet.
The raw lamellas are bonded across the entire surface, then sanded, and oiled or sealed depending on the desired use. Depending on the grading and installation method, the result is either a calm, classic oak floor or a more lively floor pattern with a more pronounced wood structure.
Overview: All solid parquet For installation, finishing, and care: Adhesives | Wood skirting boards | Wood floor oil | Parquet sealer | Care products
Advantages of Lamparkett
-
Low installation height
At 10 mm thick, Lamparkett is particularly suitable for renovations where transitions, doors, and existing floor structures must be taken into account. -
Genuine solid wood
Lamparkett consists entirely of solid wood and offers the classic quality of a single-layer parquet floor. -
Oak with parquet character
Oak is resilient, timeless, and fits both calm and more lively room concepts. -
Individually treatable
After installation, the floor is sanded and can be oiled or sealed to suit its use. -
Calm or lively
Natural grading appears calmer and more uniform, while Rustic/Striped shows more structure and wood character.
Grading, installation method, and room effect
With Lamparkett, it is primarily the grading and installation method that determine the final effect on a room. Natural creates a calmer, more uniform oak look, while Rustic/Striped shows more structure, color variation, and wood character.
The installation pattern also significantly defines the floor: individual staves allow for more freedom in planning, while an English bond creates a classic, orderly surface. This allows Lamparkett to appear either restrained and calm or more lively and artisanal, depending on the room.
Thickness & Construction
Lamparkett is a single-layer solid parquet with a low installation height. The 10 mm thick oak lamellas do not have a tongue-and-groove connection and are therefore precisely placed into the adhesive bed. A level, firm subfloor and careful workmanship are essential, as the individual staves gain their positioning through full-surface bonding.
Tip: If a more dimensionally stable structure and a larger selection of plank formats are desired in addition to a low installation height, variants of prefinished parquet could be a suitable alternative.
Technical notes on subfloor, room climate, and processing
Lamparkett requires a level, firm, and dry subfloor. Since the 10 mm thick lamellas do not have a tongue-and-groove connection, unevenness, loose areas, or excessive residual moisture must be eliminated before installation.
Before processing, the wood should be sufficiently acclimatized in the room. Room temperature, humidity, and subfloor temperature must match the specifications of the parquet and adhesive so that the wood lies as tension-free as possible after bonding.
Full-surface bonding is mandatory for Lamparkett. The adhesive, subfloor, and wood moisture content must be coordinated. After installation, the surface is sanded and then treated with oil or parquet sealer.
Oak Lamparkett is suitable for installation over hot-water underfloor heating. The specifications regarding floor construction, surface temperature, and installation according to the leaflet on parquet and underfloor heating must be observed.
