21.–23.12. wegen Inventur geschlossen · Telefonisch erreichbar unter: 09543 448-0 Showroom weiterhin geöffnet · Zum Showroom
Special Offers / Clearance Items
Special Offers / Clearance Items

Anyone who opts for a WPC deck will quickly face the next question: Solid board or hollow-core board – and what does "CoEx" actually mean? In the Gunreben range, you will find three types of boards: the solid SOLID board, the hollow-core board HOLO 4, and the solid SOLID CoEx board with a co-extruded surface. This post shows how the three variants differ and for which projects each is suitable.

You can find all available boards, colors, and surfaces in our WPC decking boards collection.

Quick decision guide

  • SOLID (solid, 22 × 143 mm): continuous solid cross-section, wide selection of colors and surfaces – from grooved and ribbed to saw-cut and distressed.
  • HOLO 4 (4 chambers, 22 × 146 mm): hollow-core profile with four chambers, lighter than a solid board and usually more affordable. The open end grain is sealed with end caps.
  • SOLID CoEx (solid, 20 × 143 mm): solid board with an additional co-extruded protective surface layer. For anyone looking for an easy-care surface with a protective layer and texture.

Regardless of the board type, the following applies: the substructure, fastening, and expansion gaps must be coordinated with the WPC system.

What exactly is WPC?

WPC stands for Wood-Plastic-Composite, which is a wood-plastic composite material. Our SOLID and HOLO 4 boards consist of around 60% wood fibers (poplar), 35% polyethylene, and 5% additives, including for UV and mold protection. As a result, WPC combines a wood-like appearance with properties that are particularly appreciated for maintenance and walking barefoot: the boards are splinter-free and do not need to be oiled.

One important difference from wood: WPC reacts primarily to temperature. In the heat, the boards expand in length, and in the cold, they contract. This behavior must be taken into account during installation – more on this below. Anyone still wavering between wood and WPC will find an overview of the wood types in the post Comparison of hardwood decking boards.

WPC SOLID: the solid all-purpose board

The WPC SOLID is a solid decking board in the 22 × 143 mm format. The full cross-section ensures a fully supported, stable walking surface. Since there are no chambers, the cut edges are also solid – end caps are not required.

WPC SOLID decking board 22 × 143 mm in dark gray with grooved surface

Its strength is above all the selection. The SOLID board is available in, among others:

Suitable for: terraces and balconies where appearance and surface variety are paramount, as well as for areas such as pool surrounds with WPC.

WPC HOLO 4: the hollow-core board with four chambers

The WPC HOLO 4 in the 22 × 146 mm format has four chambers inside. This makes it lighter than a solid board, which is noticeable during transport and installation. At the same time, it is usually more affordable than a solid board.

WPC HOLO 4 hollow-core decking board in light brown, grooved, installed as a terrace in the garden

The HOLO 4 is available in dark gray, light gray, and light brown, each grooved or ribbed – e.g., HOLO 4 light gray grooved or HOLO 4 light brown grooved.

With hollow-core boards, the chambers are open at the end grain. For a clean finish, they are sealed with suitable end caps for WPC decking boards or covered with a finish angle or cover strip.

Suitable for: budget-conscious projects, larger areas, and homeowners who prefer a lighter board – with the minor extra effort of edge finishing.

WPC SOLID CoEx: solid with a protective layer

The WPC SOLID CoEx in the 20 × 143 mm format is also a solid board. The difference lies in the surface: In co-extrusion, an additional protective layer is applied to the WPC core in a single process. According to the manufacturer's specifications, this makes the surface more resistant to UV radiation, moisture, and weather conditions; stains can be removed more easily.

WPC SOLID CoEx decking board 20 × 143 mm in honey brown with textured surface

All CoEx boards have a textured surface. Eight shades are available – from cool gray tones such as slate gray, granite, iron gray, and cement to warm brown tones such as honey brown, caramel brown, tobacco, and mocha.

Suitable for: heavily used areas, dining areas on the terrace, and anyone who wants as little maintenance as possible.

Overview: SOLID, HOLO 4, and CoEx compared

Criterion WPC SOLID WPC HOLO 4 WPC SOLID CoEx
Construction solid hollow-core (4 chambers) solid with co-extruded protective layer
Format 22 × 143 mm 22 × 146 mm 20 × 143 mm
Surfaces grooved, ribbed, fine/coarse saw-cut, French, 3D texture, distressed grooved, ribbed textured
Colors gray, brown, and distressed tones dark gray, light gray, light brown 8 gray and brown shades
Weight heavier lighter heavier
Edge finish solid cut edge end caps or finish strip required solid cut edge
Lengths Fixed lengths 3.0 m / 3.6 m / 4.2 m / 4.8 m

What matters during installation – for all three boards

Substructure

WPC boards are installed on a WPC substructure – such as the WPC substructure 40 × 60 mm – or on an aluminum substructure. A substructure spacing of 30–35 cm is recommended. WPC substructures must be supported according to the system specifications and are not intended for cantilevered constructions. Read more about material selection in the post Choosing a substructure for decking boards.

Fastening

The boards are concealed with WPC clips. For the first row, there is the WPC starter clip, for the area the WPC terrace clip 4 mm or 7 mm – each also available in black stainless steel, so that the clips are barely noticeable in the joint. You can find a comparison of fastening methods in the post The right fastening system for decking boards.

Expansion gaps

Because WPC changes in length with temperature fluctuations, a gap of approx. 20 mm should be maintained from adjacent components such as house walls, walls, or posts. Sufficient space should also be planned for board joints. You can find the exact specifications in the Gunreben installation tips for WPC terraces.

Finishing and accessories

For visible end and side edges, color-coordinated WPC finish angles and WPC cover strips are ideal. You can find everything else in the Accessories for WPC terraces. If you want to make things easy for yourself, take a look at our WPC complete sets.

Maintenance: easy, but not maintenance-free

WPC does not need to be oiled or varnished. Water, a mild soap solution, and a brush are usually sufficient for regular cleaning. For more thorough cleaning and additional protection against water, grease, and dirt, the Gunreben WPC&BPC cleaner and the WPC&BPC surface protection are suitable. Especially on dining areas, grease and drink stains should be removed as soon as possible – with the CoEx board, this is particularly easy thanks to the closed protective layer.

Which WPC board is right for which project?

  • You want a specific look – e.g., saw-cut, French, or distressed? Then the WPC SOLID with its wide selection of surfaces is the first choice.
  • Is the budget the priority, or is the area large? The WPC HOLO 4 is lighter and more affordable – plan for end caps or cover strips.
  • Is the terrace heavily used, e.g., as a dining area, or do you want as little maintenance as possible? Then there are many reasons to choose the WPC SOLID CoEx with its resistant surface.
  • Pool surround? A solid board is worth it here. You can find tips on this in the post Pool surround with WPC and in the WPC pool surround collection.

Conclusion

All three WPC boards offer the typical advantages of the material: splinter-free, barefoot-friendly, and easy to maintain without oiling. The differences lie in the construction: The SOLID impresses as a solid board with the largest selection of surfaces, the HOLO 4 as a light and affordable hollow-core board, and the SOLID CoEx with its co-extruded protective layer.

However, it is not only the board that is decisive, but the entire system of substructure, clips, and sufficient expansion gaps. Compare all colors and surfaces now in our WPC decking boards collection and order the right accessories at the same time.